Helpdesk

Top image

Editorial board

Darius Andriukaitis
Kaunas University of Technology, Lithuania

Alexander Argyros
The University of Sydney, Australia

Radu Arsinte
Technical University of Cluj Napoca, Romania

Ivan Baronak
Slovak University of Technology, Slovakia

Khosrow Behbehani
The University of Texas at Arlington, United States

Mohamed El Hachemi Benbouzid
University of Brest, France

Dalibor Biolek
University of Defence, Czech Republic

Klara Capova
University of Zilina, Slovakia

Erik Chromy
UPC Broadband Slovakia, Slovakia

Milan Dado
University of Zilina, Slovakia

Petr Drexler
Brno University of Technology, Czech Republic

Eva Gescheidtova
Brno University of Technology, Czech Republic

Ray-Guang Cheng
National Taiwan University of Science and Technology, Taiwan, Province of China

Gokhan Hakki Ilk
Ankara University, Turkey

Janusz Jezewski
Institute of Medical Technology and Equipment, Poland

Rene Kalus
VSB - Technical University of Ostrava, Czech Republic

Ivan Kasik
Academy of Sciences of the Czech Republic, Czech Republic

Jan Kohout
University of Defence, Czech Republic

Ondrej Krejcar
University of Hradec Kralove, Czech Republic

Miroslaw Luft
Technical University of Radom, Poland

Stanislav Marchevsky
Technical University of Kosice, Slovakia

Byung-Seo Kim
Hongik University, Korea

Valeriy Arkhin
Buryat State University, Russia

Rupak Kharel
University of Huddersfield, United Kingdom

Fayaz Hussain
Ton Duc Thang University, Vietnam

Peppino Fazio
Ca’ Foscari University of Venice, Italy

Fazel Mohammadi
University of New Haven, United States of America

Thang Trung Nguyen
Ton Duc Thang University, Vietnam

Le Anh Vu
Ton Duc Thang University, Vietnam

Miroslav Voznak
VSB - Technical University of Ostrava, Czech Republic

Zbigniew Leonowicz
Wroclaw University of Science and Technology, Poland

Wasiu Oyewole Popoola
The University of Edinburgh, United Kingdom

Yuriy S. Shmaliy
Guanajuato University, Mexico

Lorand Szabo
Technical University of Cluj Napoca, Romania

Tran Trung Duy
Posts and Telecommunications Institute of Technology, Ho Chi Minh City, Vietnam

Xingwang Li
Henan Polytechnic University, China

Huynh Van Van
Ton Duc Thang University, Vietnam

Lubos Rejfek
University of Pardubice, Czech Republic

Neeta Pandey
Delhi Technological University, India

Huynh The Thien
Ho Chi Minh City University of Technology and Education, Vietnam

Mauro Tropea
DIMES Department of University of Calabria, Italy

Gaojian Huang
Henan Polytechnic University, China

Nguyen Quang Sang
Ho Chi Minh City University of Transport, Vietnam

Anh-Tu Le
Ho Chi Minh City University of Transport, Vietnam

Phu Tran Tin
Ton Duc Thang University, Vietnam


Home Search Mail RSS


Encapsulation of FBG Sensor into the PDMS and its Effect on Spectral and Temperature Characteristics

Jan Nedoma, Marcel Fajkus, Lukas Bednarek, Jaroslav Frnda, Jan Zavadil, Vladimir Vasinek

DOI: 10.15598/aeee.v14i4.1786


Abstract

Fiber Bragg Grating (FBG) is the most distributed type of fiber-optic sensors. FBGs are primarily sensitive to the effects of temperature and deformation. By employing different transformation techniques, it is possible to use FBG to monitor any physical quantity. To use them as parts of sensor applications, it is essential to encapsulate FBGs to achieve their maximum protection against external effects and damage. Another reason to encapsulate is increasing of sensitivity to the measured quantity. Polydimethylsiloxane (PDMS) encapsulation appears to be an interesting alternative due to convenient temperature and flexibility of the elastomer. This article describes an experimental proposal of FBG PDMS encapsulation process, also providing an analysis of the FBG spectral characteristics and temperature sensitivity, both influenced by high temperature and the process of polydimethylsiloxane curing itself. As for the PDMS type, Sylgard 184 was employed. Encapsulation consisted of several steps: allocation of FBG to PDMS in its liquid state, curing PDMS at the temperature of 80°C ± 5 %, and a 50-minute relaxation necessary to stabilize a Bragg wavelength. A broadband light source and an optical spectrum analyzer were both used to monitor the parameters during the processes of curing and relaxation. Presented results imply that such a method of encapsulation does not have any influence on the structure or functionality of the FBG. At the same time, a fourfold increase of temperature sensitivity was monitored when compared to a bare FBG.

Keywords


Encapsulated; fiber Brag grating; polydimethylsiloxane; spectral characteristic; temperature sensitivity.

Full Text:

PDF